NetVanta 3000 Series Hardware Installation Guide Physical Descriptions61200860L1-34AA Copyright © 2010 ADTRAN, Inc. 49• Size: 1.7-inch H x 17.2-inch W x 8.0-inch D• AC Power Requirements: Auto-ranging power, 100 to 250 VAC, 50/60 Hz, 0.4 A maximum• RoHS compliant (Telecommunications exemption)Network Interface Modules and Dial Backup Interface Modules SupportedThe NetVanta 3458 supports a variety of interchangeable NIMs and DIMs. The NIMs available for theNetVanta 3458 provide a variety of WAN connectivity options including the following:• 56K/64K (DDS)• T1/FT1• T1/FT1 + DSX-1• Dual T1• E1/FE1• E1/FE1 + G.703• Serial (V.35/X.21/EIA 530)• SHDSL, Annex A and Annex B• ADSL, Annex A and Annex B• 3G CDMA, 1xRTT, 1xEV-DO Revision 0, 1xEV-DO Revision A• USB WWANIf needed, an analog modem, ISDN BRI U, or ISDN BRI S/T DIM can plug onto the NIM, providing dialbackup capability. Refer to Installing Dial Backup and Network Interface Modules on page 87 for moredetails.Refer to Installing the 3G CDMA NIM Antennas on page 90 for details regarding the antenna installationon the 3G CDMA NIM.Refer to Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93 for details oninstalling and removing a USB cellular modem from the USB WWAN NIM.NetVanta 3458 Shipping ContentsEach NetVanta 3458 unit is shipped in its own cardboard shipping carton. Open each carton carefully, andavoid deep penetration into the carton with sharp objects.After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged intransit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to theWarranty, Repair, and Return section of the Support page on the ADTRAN website athttp://www.adtran.com/support).Domestic Shipping ContentsShipments of the NetVanta 3458 domestic units include the following items:• NetVanta 3458 base unit with attached mounting brackets and screws• AOS documentation bundle• Power cord
