61200624L1-1B © 2004 ADTRAN, Inc. 215DLP-12 Loading a Configuration Using XMODEMIntroductionThe Total Access 6XX supports configuration uploads from a unit via the CRAFT interface using a VT100terminal or terminal emulator (with XMODEM). This DLP provides the steps for a successfulconfiguration upload using the rear CRAFT port and XMODEM protocol.Tools and Materials Required• VT100 terminal or PC with VT100 terminal emulation software• XMODEM software• Appropriate cable to connect terminal to the Total Access 6XX (customer-provided).• DB-9 female to RJ-48 female adapter (ADTRAN proprietary) for connecting to the CRAFT port on therear of the unit (see CRAFT Port on page 31).To prevent electrical shock, do not install equipment in a wet location or during alightning storm.Electronic equipment can be damaged by static electrical discharge. Before handlingmodules, put on an antistatic discharge wrist strap to prevent damage to electroniccomponents. Place equipment in antistatic packing material when transporting or storing.When working on equipment, always place it on an approved antistatic mat that iselectrically grounded.
