61200.130L1-1 FSU User Manual 3 3Chapter 5. Configuration OverviewChapter 5Configuration OverviewLOCAL AND REMOTE CONFIGURATIONThe FSU can be configured locally or, when using the VT 100interface, communications can be established so a local FSU canconfigure a remote FSU. See the chapter Operation for informa-tion on selecting Local or Remote operation.The Configuration menu (Figure 5-1) consists of submenusrelating to specific interfaces or functions of the FSU requiringsetup:DTE Port 1DTE Port 2Network PortControl (front panel only)IP RoutingSystem ConfigurationConfigure the Network Port before the DTE Ports. Selections made willaffect the choices available for the DTE ports.When configuring DTE port 1 or 2, select the Protocol first. Thisselection determines which parameters will be available for the PhysicalLayer Options, Protocol Options, and Protocol Address Table.
