Introduction 5cPCI-36151.5 Package ContentsThe cPCI-3615 is packaged with the following components. If anyof the items on the contents list are missing or damaged, retain theshipping carton and packing material and contact the dealer forinspection. Please obtain authorization before returning any prod-uct to ADLINK. The packing contents of the cPCI-3615 Series arenon-standard configurations and may vary depending on customerrequests.Processor BladeX The cPCI-3615 Series Processor BladeZ CPU, RAM specifications will differ depending onoptions selectedZ Thermal module is assembled on the boardX Y-cable for PS/2 combo port (8HP/12HP version only)X 2.5” HDD accessory pack (8HP/12HP version only)X ADLINK All-in-One CDX User’s manualRear Transition ModuleX cPCI-R3610: 8HP width, 50mm depth Rear Transition Mod-ule with 2x COM, USB, 2x GbE, 2x SATA, VGAX cPCI-R3610T: 8HP width, 80mm depth Rear TransitionModule with 2x COM, USB, 2x GbE, 2x SATA, VGANOTE:NOTE:The contents of non-standard cPCI-3615 configurations mayvary depending on the customer’s requirements.CAUTION:This product must be protected from static discharge and phys-ical shock. Never remove any of the components except at astatic-free workstation. Use the anti-static bag shipped with theproduct when putting the board on a surface. Wear ananti-static wrist strap properly grounded on one of the system'sESD ground jacks when installing or servicing system compo-nents.