ADEMCO VISTA-128B Quick Start Manual

Also see for VISTA-128B: User guide User guide Installation and setup gude

Contents

ADEMCO VISTA-128B Quick Start Manual Manual pdf 31 page image

— 32 —Scheduling Menu PromptsTo program schedules, enter Scheduling program mode by pressing [Installer Code] + # + 80 to display the firstchoice of the menu driven programming functions. Press 0 (NO) or 1 (YES) in response to the displayed menuselection. Pressing 0 will display the next choice in sequence. Menu selections are as follows:Time Window ?1 Yes 0 = No 0For defining up to 20 time windows each with a start and a stoptime programmed by entering the hours and minutes.O/C Schedules ?1 Yes 0 = No 0For defining the daily open and close schedules for the 8 partitions.Each partition can be programmed with an opening and closingwindow for each day of the week and holidays.Holidays ?1 Yes 0 = No 0For defining up to 16 holidays for which partitions they apply.Timed Events ?1 Yes 0 = No 0For defining up to 20 time driven events with the followingparameters:• Time window• Action desired• Action specifier• Activation time• Days of the weekAccess Sched. ?1 Yes 0 = No 0For defining the limitation of access schedules for the user codes.Each schedule can be programmed with two window for each dayof the week and holidays#80 & #81 MENU MODE KEY COMMANDSThe following is a list of commands used while in the menu mode.#80 or#81Enters Menu mode[Q] Serves as ENTER key. Press to have keypad accept entry.[#] Backs up to previous screen.0 Press to answer NO1 Press to answer YES01-09 All data entries are either 2-digit entries.00 Escapes from menu mode, back normal operation mode, when entered at the first question for eachcategory.