What to do if the ADMIN password has been forgottenIf.the.ADMIN.password.becomes.mislaid.or.forgotten,.you.will.not.be.able.to.access.the.AdderView.CATxIP.1000.to.add.or.edit.users.and.computer.names..This.situation.may.be.resolved.by.performing.a.complete.reset.to.return.the.AdderView.CATxIP.1000..IMPORTANT: A complete reset erases all the user names and computernames that you have setup.To clear a password (and restore factory default settings)1. Remove.power.from.the.AdderView.CATxIP.1000.unit.2. Press.and.hold.the.reset.button.on.the.front.panel.(requires.paper.clip.or.similar).3. Apply.power.and.after.a.couple.of.seconds.release.the.reset.button..The.Maintenance.menu.will.be.displayed. 4. Highlight.‘Reset.Configuration’.and..press. ..The.Reset.Config.warning.will.be.displayed.5. Highlight.‘Reset’.and.press. ..All.settings.will.be.returned.to.their.factory.defaults.and.the.previous.Maintenance.menu.will.be.re-displayed.6. Remove.power.from.the.unit.and.then.re-apply.it.7. You.now.need.to.go.through.the.initialconfiguration procedure.and.re-instate.all.of.the.required.settings.
