ADDER AdderLink X-USBPRO Manual

Contents

ADDER AdderLink X-USBPRO Manual Manual pdf 10 page image

welcome contentsinstallationoperationrterinormation9Connections at the remote module1 Place the remote module adjacent to the user location.To videodisplay2 Attach the leads of up to fourUSB devices (two of which areusually a keyboard and mouse)to the sockets located adjacentto the video output connector.3 Attach the lead from thevideo display to the videoout socket on the remotemodule.To USBdevices[MS2 variant only] Optionallyattach the lead from a secondvideo display to the uppervideo out socket on the MS2remote module.To primaryvideo displayTo secondaryvideo display[MS2 variant only] When connecting four USBdevices to the unit, ensure that their total powerrequirements do not exceed 1700mA (1.7A).The USB standard states a maximum allowablecurrent draw of 500mA (0.5A) per device,although most devices remain wellbelow this limit - USB keyboardsand mice typically require 100mA.Each X-USBPRO contains a self-resetting fuse that will preventdamage by shutting down theunit if the total power drawbecomes excessive.