ACTi D52 Hardware Manual

Also see for D51: Installation guide User manual Hardware manual

ACTi D52 Hardware Manual Manual pdf 27 page image

www.acti.comHardware Manual27Using the Default Camera IP AddressIf there is no DHCP server in the given network, the user may have to assign the IP addresses toboth PC and camera manually to make sure they are in the same network segment.When the camera is plugged into network and it does not detect any DHCP services, it willautomatically assign itself a default IP:192.168.0.100Whereas the default port number would be 80. In order to access that camera, the IP address ofthe PC has to be configured to match the network segment of the camera.Manually adjust the IP address of the PC:In the following example, based on Windows 7, we will configure the IP address to 192.168.0.99and set Subnet Mask to 255.255.255.0 by using the steps below:1 23 4