ACR STOVES NEO User, Installation & Servicing Instructions

Also see for NEO Electric: Technical user's manual

Contents

ACR STOVES NEO User, Installation & Servicing Instructions Manual pdf 37 page image

Fault Finding ChecklistISSUE POSSIBLE CAUSE SOLVEFrequent beeps for 3 secondswhilemotor turns.1.Ba�eries (Receiver) are low Replace ba�eries (Quality Alkaline recommended).Pilot Flame lights but there is nomain gas flow1.Manuals override knob (ifequipped) is in MAN posi�on.Turn Manual override knob to ON posi�on.2.Valve turned down to pilot flow Turn flame to high fire by pressing up bu�on on remote handset,3.Valve Replace Valve. Do not over�ghten the Thermocouple Interrupter.Latching Solenoid does not work. 1.Loose connec�on Check Connec�on is �ght and pins are straight2.Latching Solenoid Replace Latching Solenoid3.Receiver Replace Receiver and reprogram code.4.Handset Check that the Handset shows the AUX-symbol if you press SET + UPISSUE POSSIBLE CAUSE SOLVEWill not operate with handset 1. Transmi�er ba�eries low Replace Transmi�er ba�eries. Quality alkaline recommended.2. Receiver ba�eries low Replace Receiver ba�eries with 1.5 V”AA” quality alkaline ba�eries.3.Op�onal Mains Adapter notopera�ng properlyCheck Mains Adapter4.Check coding of Transmi�er andReceiver (Ini�al Sync.)Learn new code (reset). See label on receiver.5.Transmi�er distance limited 1. Straighten the Antenna2. Replace Receiver, See wiringdiagrams, pg. 8-12, in theopera�ng/installa�on instruc�ons for the GV6036