ACR Electronics Nauticast 2662 User Manual

Also see for NAUTICAST 2662: Installation manual Manual Installation manual Manual Manual

Contents

ACR Electronics Nauticast 2662 User Manual Manual pdf 61 page image

Y1-03-0211 Rev D 573.5.5 Service Configuration (Service Password Protected)The Service Configuration Menu allows initial configuration of the Service Password,Password Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICASTto Factory Settings.The Service Password is required in order to enter the Service Configuration Menu. This is ahigher security level than can be reached with the User Password and therefore ensures thatthe Service Configuration is protected, and limited to authorized service personnel.NOTE: Please see Appendix 7.3 for password information. It is strongly recommended tochange the service password immediately after commencing initial NAUTICAST operation!Dynamic Keys: Service Configuration[M5] [Select] Confirm SubmenuSelection [Enter] Confirm SubmenuSelection[M8] [Back] Return to MainMenuAfter entering the Default Service Password (Please see Appendix 7.3 for passwordinformation) in the password query, the Service Configuration Menu may be accessed. Inthis menu it is possible to configure both the Service Password and the User PasswordSettings, as well as input the MMSI/IMO Numbers and reset the to Factory Settings.N 1o21' E 0o14' |1>0.01|2>1.30|3>1.80nm|----------------------------------| 6. Service Configuration-----| || +- 1. Change Service PasswordView | +- 2. User Password Settings| +- 3. Change MMSI / IMO-----| +- 4. Change DAC / ESN| +- 5. Change AIS ModeMsg. | +- 6. Restore Factory Settings|-----||Displ|----------------------------------------NUM| Select->| | |<-BackN 1o24' E 0 o17' |1>0.10|2>1.30|3>1.80nm----------------------------------------++++++++++++++++++++++++++++++++++++++++Service password protected!Please enter service password:++++++++++++++++++++++++++++++++++++++++----------------------------------------| Enter | | | Exit