ACR Electronics Nauticast 2662 User Manual

Also see for NAUTICAST 2662: Installation manual Manual Installation manual Manual Manual

Contents

ACR Electronics Nauticast 2662 User Manual Manual pdf 13 page image

Y1-03-0211 Rev D 91.5 Service and User PasswordsWARNING: It is very important that the Service password not be lost. The defaultpassword from the factory is mentioned on your AIS display at the protection foil. (seeAppendix 7.3 for password information). Keeping the password in a second location may bewise. Memorizing the password is best. If you lose this password, you cannot make anyfurther configuration changes: Access to the AIS is blocked. Another master key is notavailable and the unit would have to be returned to the ACR Service centre. This service isnot free of charge.Once you have entered the system, please change the default password to your ownpasswords, for both levels of access. Use different passwords for the different securitylevels. Your passwords must meet the following criteria:Minimum of six (6) characters, maximum of eight (8) charactersLetters must be in UPPER CASEAcceptable characters are the A-Z alphabet and 0- 9 digitsPassword may contain both letters and numbersThe User Password can be reset in the service configuration menu by entering the ServiceConfiguration menu and creating a new password.Changing the Service PasswordSelect “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] orpress Number 6 on the keyboard.The password query field appears. Input default Service Password and press M5 [Enter].Select Submenu 1 “Change Service Password” with cursor button [Up] & [Down] by pressingNumber 1 on the keyboard.N 1o24' E 0o17' |1>0.10|2>1.30|3>1.80nm----------------------------------------++++++++++++++++++++++++++++++++++++++++Service password protected!Please enter service password:++++++++++++++++++++++++++++++++++++++++----------------------------------------| Enter | | | Exit