ABB TZIDC-200 Commissioning Instructions

Also see for TZIDC-200: Manual Manual Operating instructions Operating instruction Operating instruction

ABB TZIDC-200 Commissioning Instructions Manual pdf 30 page image

Commissioning28 - EN TZIDC-200, TZIDC-210, TZIDC-220 CI/TZIDC-200/210/220-EN6.2.2 Request informationWhen the unit is in bus operation, a variety of information can be called up.Press the following control buttons to access this information:Control buttons ActionCyclic communication:Displays the setpoint in % and the setpoint status.Acyclic communication:Displays the communication status.Displays the bus address and operating mode.ENTER Displays the software revision.6.2.3 Operating modesSelection from the operating level:• Press and hold down• Press and release as often as required to display the selected operating mode• Release• The position is displayed in % or as a rotation angleOperating mode Mode indicator Position indicator1.1Positioning with fixed setpointUse or to adjust the setpoint confmA% C°confmA% C°1.2Manual adjustment 1) in the operating rangeAdjust with or 2) confmA% C°confmA% C°1.3Manual adjustment 1) in the sensor rangeAdjust with or 2) confmA% C°confmA% C°1) Positioning not active.2) for high-speed mode: Press and simultaneously.