ABB TEIP11 Operating Instruction

Also see for TEIP11: Operating instructions

Contents

ABB TEIP11 Operating Instruction Manual pdf 9 page image

TEIP11, TEIP11-PS | 42/18-46-EN Rev. L 94 Product identification4.1 Name plateFig. 3: Name plate (example)1 Type designation 2 Order number 3 Input signal 4 Outputsignal 5 Supply air pressure 6 Serial number 7 Manufacturer’saddress4.2 Scope of delivery— Check the delivery for completeness, signs of damage,design and scope immediately upon receipt.— Check that the delivery matches your order.4.2.1 AccessoriesThe following loose accessories are delivered with the unit asextra items:— Aluminum or stainless steel mounting bracket for the fieldmount housing in two designs:— For wall mounting only.— Universal for wall or 2" pipe mounting.— Cable entry for I/P signal converter with the "flameproof(enclosure) (Ex d)" type of protection.5 Transport and storage5.1 InspectionCheck the devices immediately after unpacking for possibledamage that may have occurred from improper transport.Details of any damage that has occurred in transit must berecorded on the transport documents.All claims for damages must be submitted to the shipperwithout delay and before installation.5.2 Storage conditionsBear the following points in mind when storing devices:— Store the device in its original packaging in a dry anddust-free location.— Observe the permitted ambient conditions for transportand storage.— Avoid storing the device in direct sunlight.— In principle, the devices may be stored for an unlimitedperiod. However, the warranty conditions stipulated in theorder confirmation of the supplier apply.Ambient conditions during storageStorage temperature -40 ... 85 °C (-40 ... 185 °C)Humidity Store device in a dry location.The device is also protected by a desiccantincluded in the original packaging.5.3 Returning devicesFor the return of devices, follow the instructions in the chapter"Repair" on page 14.M103481Instr.-No.:Kennlinie/Action:Schillerstraße 72Made in GermanyD - 32425 MindenI/P-Umformer/ConverterOrder No.:Luft/Air:TEIP11-PSABB Automation Products GmbH234567Kennlinie/Action:Instr.-No.:Luft/Air:I/P-Umformer/ConverterOrder No.:TEIP11-PSSchillerstraße 72D - 32425 MindenMade in GermanyABB Automation Products GmbH