ABB SM500F User Manual

Also see for SM500F: User guide Commissioning instructions Manual Instruction Instruction

ABB SM500F User Manual Manual pdf 20 page image

Field Mountable Videographic RecorderSM500F 2 Installation18 IM/SM500F Issue 10.12.6 Transmitter Power Supply Module – Fig. 2.11One transmitter power supply module can be fitted in position D to provide a nominal 24V supply capableof driving two, 2-wire transmitters.2.7 RelaysOne relay is provided as standard (position E). An additional relay module can be fitted in position D toprovide two additional relays.The maximum individual relay current is 5A.Relay contacts are fitted with arc suppression components as standard.Set the polarity using the relay links provided on the instrument's motherboard (for the standard relay) andthe relay module board (for the optional additional relays) – see Fig. 2.8 on page 15.Fig. 2.11 Transmitter Power Supply ModuleNote. Analog input terminal screws must be tightened to a torque of 0.5 Nm (4.5 lbf.in).;'6) ( 0 ) %%$/.+'2 3%(' < 6; '; '