ABB SM500F User Manual

Also see for SM500F: User guide Commissioning instructions Manual Instruction Instruction

ABB SM500F User Manual Manual pdf 13 page image

Field Mountable Videographic RecorderSM500F 2 InstallationIM/SM500F Issue 10.1 112.2.3 Pipe-Mounting (Optional) – Fig. 2.6Referring to Fig. 2.6, secure the instrument to a pipe as follows:a Fit two M6 x 50mm long hexagon-head screws through one clamp plate as shown.b Using the appropriate holes to suit vertical or horizontal pipe, secure the clamp plate to thepipe-mounting bracket using the two M6 x 8mm long hexagon-head screws and two of the springlock washers.c Position the pipe mounting bracket into the recesses on the rear of the instrument as shown andsecure with the two bracket securing screws. Ensure the plastic washers remain in the positionsfitted.d Secure the instrument to the pipe using the remaining clamp plate, spring lock washers and nuts.Fig. 2.6 Installing the Instrument – Pipe-Mounting (Optional)Note. If removal of knockouts is required, refer to Section 2.3.1 on page 13.7 &