40 User GuideEnabling Operator page autoscrollThe autoscroll feature allows you to move automatically between Operator pages at a set time interval.This is useful when you simply want to record specific values manually without touching the instrument.This feature is disabled by default.To enable autoscroll:1 Select Display > Autoscroll.2 Press Edit.3 Select one of the time intervals (3, 5, 7, 10 Seconds) that you want to set as a time delay after whichOperator pages scroll automatically.4 Press OK.When the autoscroll feature is enabled, a spinning icon appears next to the Operator page number.—Figure 25 Autoscroll icon next to the Operator page number (4)Autoscroll iconNOTICEIf the feature is activated and you want to deactivate it, highlight Off instead of thealready selected time interval.Protecting access to instrument dataLWT instruments offer a few methods of protecting access to their data. You can set role-basedpasswords (standard and advanced users) and enable instrument write-protection (software andhardware) from the Access Control menu under the Device Setup menu.—Figure 26 The Device Setup menuFor more information on securing your instrument from unwanted access, see “Cybersecurity” onpage 5.
