Menu
ABB LWT300 Series User Manual
Also see for LWT300 series: User guideQuick start guideQuick start guideQuick start guide
                                                                                                            | |
Contents
| 
Configuring the instrument 418 Highlight the value that you want to display and press OK.9 (if necessary) Repeat steps 6 through 8 to configure all remaining values.Once you have completed the configuration, exit the Display menu.Selecting an Operator page to displayIf necessary, you can choose which Operator page to display as the default display. When firstconnecting the instrument, Operator page 1 is selected by default.To select another page:1 From the startup display, press the left action key ( ). The Operator Menu appears.2 Using the Up or Down arrow keys, highlight the Operator Page that you want to use by defaultNOTICEThe Signals View and Diagnostics pages can be selected, but cannot be used asOperator pages. These pages are mostly used for troubleshooting purposes.3 Press Select. The page is selected and you automatically return to the startup display where thenewly selected page appears. For more information on configuring the content of Operator pages,see “Configuring Operator pages” on page 40).Enabling Operator page autoscrollThe autoscroll feature allows you to move automatically between Operator pages at a set time interval.This is useful when you simply want to record specific values manually without touching the instrument.This feature is disabled by default.To enable autoscroll:1 Select Display > Autoscroll.2 Press Edit.3 Select one of the time intervals (3, 5, 7, 10 Seconds) that you want to set as a time delay after whichOperator pages scroll automatically.4 Press OK.When the autoscroll feature is enabled, a spinning icon appears next to the Operator page number.—Figure 31 Autoscroll icon next to the Operator page number (4)Autoscroll iconNOTICEIf the feature is activated and you want to deactivate it, highlight Off instead of thealready selected time interval. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved