Menu
ABB LWT300 Series User Manual
Also see for LWT300 series: User guideQuick start guideQuick start guideQuick start guide
                                                                                                            | |
Contents
| 
12 User GuideDisclaimersABB declares that the content of this guide is not part of any prior or existing agreements,commitments, or legal relationships, nor are they intended to amend these. ABB obligations arisefrom the conditions of the relevant sales agreement, which also contains the solely binding warrantyregulations in full. These contractual warranty provisions are neither extended nor limited by theinformation provided in this guide.Improper useIt is prohibited to use the instrument for any of the following, including but not limited to:• A climbing aid, e.g., for mounting purposes.• A support for external loads, e.g., as a support for pipes.• By adding material, e.g., by painting over the name plate, or welding/soldering on parts.• By removing material, e.g., by drilling the housing.Repairs, alterations, and enhancements, or the installation of replacement parts, are only permissible asfar as these are described in this guide. Approval by ABB must be requested in writing for any activitiesbeyond this scope. Repairs performed by ABB-authorized centers are excluded from this article.Technical limit valuesThe instrument is designed for use exclusively within the values stated on the name plates and withinthe technical limit values specified on the data sheets.Technical limit values that must be observed at all time are:• The maximum working pressure, ambient working temperature, and maximum process temperaturemay not be exceeded.• The housing protection type must be observed.• The electrical specifications must be observed.Operator liabilityPrior to measuring levels of corrosive and abrasive materials, the operator must check the level ofresistance of all instrument parts coming into contact with these materials.CAUTIONPrior to using the instrument, safety data sheets (SDS) of all products being monitoredmust be available at all times for users’ security.ABB will gladly support you in selecting the materials, but cannot accept any liability in doing so.Operators must strictly observe the locally applicable national regulations with regard to installation,function tests, repairs, and maintenance of electrical devices. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved