Menu
ABB HTP500 User Manual
                                                                  | |
Contents
| 
And afterwards the following messageBring the “Support Plate TB” with a module of T-Block tags positioned on and insert itcarefully till the printer makes a beep.The printer detects the “Support Plate TB” and moves it in the correct HOME position readyfor the print.Be sure that the ONLINE light is turned on and that HTP500 V2 is in ONLINE mode.5.4 PRINT ON TERMINAL BLOCK TAGS TB SERIESRun the printing from software HTS500.Press push Button New Job.Select the Item to Print MC512.Press the Button New from the Generator Window.Insert the data to print.Press push button Confirm.Press push button Close.Press push button Run.Press push button Print.Press push button of the Device/Printer Terminal Blocks.6 - PRINTS OF PVC TAGS and METHACRYLATE TAGS in “NONE” and“ACRYL Mode”This explain how to print in manual modality the tags and strips with HTP500 V2 easily andquickly.All needs to be done is to position correctly the items to be printed on the printer followingcarefully the instructions here follow.6.1 Preparing the printer6.2 Inserting the Modules in the Printer6.3 Turning on the Printer6.4 Print on tags and strips6.1 PREPARING THE PRINTERTo load an item perform the steps shown below.Open the tray pulling the auxiliary tray as shown in the picture below.REMINDWhen the “Support Plate TB” is in the correct HOME position, if you don’t print with the PC in 5minutes, the printer Automatically moves the “Support Plate TB” from the home position.PRINT READY..SINGLE SBLACK |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved