ABB CL Series Applications Manual

Also see for CL Series: Applications manual

Contents

ABB CL Series Applications Manual Manual pdf 208 page image

Setting date and time2051SVC 440 795 M0100Setting date and time Some CL-LSR/CL-LST and CL-LMR/CL-LMT devices areprovided with a real-time clock with date and time functions.Type designation CL-LSR.C.../CL-LST.C... and CL-LMR.C.../CL-LMT.C... The time switch function relays can thus be usedto implement time switch applications.Setting the timeIf the clock is not yet set or if the the logic relay is restartedafter the backup time has elapsed, the clock will start withthe setting “SA 0:01 01.05.2004”. The CL clock operateswith date and time so that hour, minute, day, month andyear have to be set.X Select SET CLOCK… from the main menu.This will open the menu for setting the time.X Select SET CLOCK and confirm with OK.X Set the values for time, day, month and year.X Press the OK button to access the Entry mode.– ú í Move between the parameters– ÍÚ Change the value of a parameter– OK Save day and time– ESC Retain previous setting.Press ESC to leave the time setting display.h Factory setting:„SA 0:01 01.05.2004“SET CLOCKSUMMER TIMEHH:MM: 18:24DD.MM 05.05YEAR : 2002