ABB AX411 User Manual

Also see for AX411: Manual User guide User guide User guide

ABB AX411 User Manual Manual pdf 10 page image

8…3 OPERATOR VIEWS3.2 View OutputsTheoretical Analog OutputThere are up to four analog outputs, each showing information for one sensor:Note. Analog outputs 3 and 4 are available only if the optional analog output boardis fitted.Current output.Current output as a percentage of full scale for the output range selected.See Section 3.3.If sensor calibration enabled – see Section 4.1.If Alter Sec. Code is not set to zero – see Section 5.1.If Alter Sec. Code is set to zero – see Section 5.2.Analog Output 2 – repeat for outputs 2 to 4.3.3 View HardwareSensor A ModuleShows the type of sensor connected to the analyzer's Sensor A input.Sensor B Module – Dual Input Conductivity onlyShows the type of sensor connected to the analyzer's Sensor B input.Option BoardShows the type of option board fitted to the analyzer (if applicable).See Section 3.4.If sensor calibration enabled – see Section 4.1.If Alter Sec. Code is not set to zero – see Section 5.1.If Alter Sec. Code is set to zero – see Section 5.2.50.0%Analog Output 112.00mAVIEW OUTPUTS-----VIEW HARDWARESENSOR CAL.Security CodeCONFIG. DISPLAYAnalog Output 2Cond.Cond.-----Sensor A ModuleVIEW HARDWARE-----Option Board-----Sensor B Module-----OffModbusAnalogVIEW SOFTWARESENSOR CAL.Security CodeCONFIG. DISPLAYAnalog Output 2