User Manual of Digital Video Recorder635.3 Configuring Motion Detection RecordPurpose:Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection eventtakes place, the DVR can analyze it and do many actions to handle it. Enabling motion detection function cantrigger certain channels to start recording, or trigger full screen monitoring, audio warning, notifying thesurveillance center, sending email and so on.Steps:1. Enter the Motion Detection interface.Menu>Camera>MotionFigure 5. 13 Motion Detection2. Configure Motion Detection:1) Choose camera you want to configure.2) Check the checkbox after Enable Motion Detection.3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for allthe area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.Figure 5. 14 Motion Detection- Mask4) Click Handling, and the message box for channel information pops up.Figure 5. 15 Motion Detection SettingsAvailable from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com
