IPS3110 SeriesUnmanaged Industrial EthernetSwitch Quick Installation Guide3onedata Co., Ltd.Address: 3/B, Zone 1, Baiwangxin High TechnologyIndustrial Park, Xili, Nanshan District,ShenzhenWebsite: www.3onedata.comTel: +86 0755-26702688Fax: +86 0755-26703485【Package Checklist】Please check whether the package and accessories are intactwhile using the switch for the first time.1. Industrial Ethernet switch 2. Certification3. Quick installation guide 4. Warranty card5. DIN-Rail mounting attachmentIf any of these items are damaged or lost, please contact ourcompany or dealers, we will solve it ASAP.【Product Overview】This series are unmanaged industrial Ethernet switches.Models as follows:Model I. IPS3110-2GC-8POE (2 Gigabit Combo + 8 100MPoE copper ports)Model II. IPS3110-2GC-4T-4POE (2 Gigabit Combo + 4100M copper ports + 4 100M PoE copper ports)【Panel Design】 Top view, Bottom view and Rear view, Front viewModel I Model Il1. Grounding screw2. Relay alarm output terminal block3. Console port4. Power supply input terminal block (PWR1, PWR2)5. DIP switch6. DIN-Rail mounting kit7. Power supply indicator8. Alarm indicator9. System running indicator10. POE port indicator11. 10/100Base-T(X)POE port12. Ethernet Link/Act indicator:13. Gigabit SFP port of Combo port14. Gigabit copper port of Combo port15. 10/100Base-T(x) copper port【Mounting Dimension】Unit: mmAttention before mounting: Dont place or install the device in area near water ormoist, keep the relative humidity of the devicesurrounding between 5%~95% without condensation. Before power on, first confirm the supported powersupply specification to avoid over-voltage damaging thedevice. The device surface temperature is high after running;please dont directly contact to avoid scalding.【DIN-Rail Mounting】For convenient usage in industrial environments, the productadopts 35mm DIN-Rail mounting, mounting steps as below: