3onedata IES2010 Series Quick Installation Manual

3onedata IES2010 Series Quick Installation Manual Manual pdf 1 page image

IES2010 SeriesUnmanaged Industrial EthernetSwitch Quick Installation Guide3onedata Co., Ltd.Address: 3/B, Zone 1, Baiwangxin High TechnologyIndustrial Park, Xili, Nanshan District,ShenzhenWebsite: www.3onedata.comTel: +86 0755-26702688Fax: +86 0755-26703485【Package checklist】Please check whether the package and accessories are intactwhile using the switch for the first time.1. Industrial Ethernet switch 2. Certification3. Quick installation guide 4. Warranty card5. DIN-Rail mounting attachmentIf any of these items are damaged or lost, please contact ourcompany or dealers, we will solve it ASAP.【Product Overview】This series are 100M/Gigabit unmanaged DIN-Rail industrialEthernet switch. Models as follows:Model I. IES2010-2GS (2 Gigabit SFP + 8 100M copperports)Model II. IES2010-2GS-4F (2 Gigabit SFP + 4 100M fiberports + 4 100M copper ports)【Panel design】 Rear view, Top view and Bottom view Front view1. DIN-Rail mounting kit2. Grounding screw3. Power supply input terminal block4. Power supply input status indicator PWR5. Port connection indicator6. 100Base-FX Ethernet fiber port7. 1000Base-SFP Ethernet SFP slot8. 10/100Base-T(X) Ethernet copper port (includingindicator)9. 10/100Base-T(X) Ethernet copper port【Mounting Dimension】Unit: mmAttention before mounting: Don't place or install the device in area near water ormoist, keep the relative humidity of the devicesurrounding between 5%~95% without condensation. Before power on, first confirm the supported powersupply specification to avoid over-voltage damaging thedevice. The device surface temperature is high after running;please don't directly contact to avoid scalding.【DIN-Rail Mounting】For convenient usage in industrial environments, the productadopts 35mm DIN-Rail mounting, mounting steps as below:Check whether the DIN-Rail mounting kit thatStep 1comes with the device is installed firmly.Insert the bottom of DIN-Rail mounting kit (one sideStep 2with spring support) into DIN-Rail, and then insertthe top into DIN-Rail.Tips:

/ 2

Related manuals for 3onedata IES2010 Series