3onedata IPS215 Series Quick Installation Manual

Also see for IPS215 Series: Quick installation guide

3onedata IPS215 Series Quick Installation Manual Manual pdf 1 page image

IPS215 SeriesUnmanaged Industrial PoEEthernet SwitchQuick Installation Guide3onedata Co., Ltd.Address: 3/B, Zone 1, Baiwangxin High TechnologyIndustrial Park, Xili, Nanshan District, ShenzhenWebsite: www.3onedata.comTel: +86 0755-26702688Fax: +86 0755-26703485【Package Checklist】Please check whether the package and accessories are intactwhile using the switch for the first time.1 Industrial Ethernet switch 2 Quick installation guide3 DIN-Rail mounting attachment4 Certification 5 Warranty cardIf any of these items are damaged or lost, please contact ourcompany or dealers, we will solve it ASAP.【Product Overview】This series of products are 5-port 100M unmanaged industrialPoE Ethernet switches. Models are as follows:Model I. IPS215-4POE (1 100M copper port + 4 100M POE)Model II. IPS215-1F-4POE (1 100M fiber port + 4 100MPOE)【Panel Design】 Top view, bottom view and rear view Front ViewModel I Model II1. Grounding screw2. Terminal block for power input3. DIP switch4. DIN-Rail mounting kit5. POE power supply status indicator （POE1-POE4）6. Power supply indicator PWR7. Device running indicator (RUN)8. Ethernet interface link indicator (1-5)9. 100M PoE port (1-4)10. 100M copper port (Model I: port 5)11. 100M fiber port (Model II: port 5)【Mounting Dimension】Unit: mmNotice before mounting: Don't place or install the device in area near water ormoist, keep the relative humidity of the devicesurrounding between 5%~95% without condensation. Before power on, first confirm the supported powersupply specification to avoid over-voltage damaging thedevice. The device surface temperature is high after running;please don't directly contact to avoid scalding.【DIN-Rail Mounting】The product adopts 35mm standard DIN-Rail mounting whichis suitable for most industrial scenes, mounting steps asfollows:

/ 3

Related manuals for 3onedata IPS215 Series