3D Systems CubePro User Manual

Also see for CubePro: User guide Repair guide Original instructions Original instructions Setting up

Contents

3D Systems CubePro User Manual Manual pdf 8 page image

43D Systems, Inc.3 CUBEPRO 3D PRINTER FEATURES AND BENEFITSThe CubePro 3D printer prints the model by pulling material from the cartridge through the print jets via the delivery tubes The materialis then jetted through the print jet in a thin string of molten material The print jet movement is coordinated by the print plate, whichlowers incrementally after each layer is deposited so a new layer can be drawn on top of the last, building the part upCUBEPRO 3D PRINTER PROPERTIES• Plastic Jet Printing (PJP) technology• Houses up to three print jets for multi-color and multi-material prints• Choice between ABS and PLA plastic, both recyclable• Prints objects up to 275 x 265 x 230 mm (10 75”x10 5”x9 05”)• Smart Insta Load print cartridge• Fully automated supports: peel off supports for ABS and PLA PLA supports can also be removed using an Ultrasonic SupportRemoval Tank available at http://cubify com/en/CubePro/SuppliesPRINT MATERIALSBy default, the CubePro can print PLA and ABS print material. Each material has unique benefits and you can guide your selectionbased on the properties your part requiresPLA • This is a hard plastic that has a low environmental impact It is derived from renewable, starch-based resources• We recommend using PLA when printing extra-large parts on CubePro as it is a more stable print material• PLA is the optimal support material for industrial ABS parts PLA has the ability to dissolve away in caustic sodasolutions supported by an ultra-sonic tankABS • This is a well-known plastic known for its strength and industrial properties• As a build material, ABS is good for both small and large parts• ABS works well as a support material for extra-large PLA partsMATERIAL COLOR CHOICESThere are multiple material color choices available Visit www cubify com for a listing of available material types and colors