83D Systems, Inc.UNPACKING AND SETTING UP YOUR CUBEPROCAUTION: Due to the size and weight of the printer, this procedure may require more than one person Ensurethere are enough people to safely and comfortably move the printer to its final location.NOTE: Ensure that you save all foam and packing material for the future repacking of your CubePro Shipping theprinter without original packing materials may cause damage to the printer1 Carefully cut the straps (A) and then pull the tabs (B) on all four release clipsNOTE: There is one release clip on each side of the box2 Pull the handles (A) and remove the release clips from the outer boxBAA
