1-5To do... Use the command... RemarksEnter system view system-view —interface interface-typeinterface-numberEnter port view or port groupview port-group manualport-group-nameRequiredUse either approach.Configue the user port link typeas hybrid port link-type hybrid RequiredAccess by defaultSpecify the user VLAN thatcomprises the current userport(s) as the default VLANport hybrid pvid vlan vlan-id RequiredVLAN 1 by defaultConfigure the current userports to permit packets of thespecified IPv6 multicast VLANto pass and untag the packetsport hybrid vlan vlan-id-list{ tagged | untagged }RequiredBy default, a hybrid port permitsonly packets of VLAN 1 to pass.For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer toVLAN Commands in the Access Volume.Configuring IPv6 Multicast VLAN PortsIn this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user portsto this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying theIPv6 multicast VLAN on the user ports. These two methods give the same result.Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN viewFollow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:To do... Use the command... RemarksEnter system view system-view —Configure the specified VLANas an IPv6 multicast VLAN andenter IPv6 multicast VLAN viewmulticast-vlan ipv6 vlan-idRequiredNo IPv6 multicast VLANconfigured by defaultAssign port(s) to the IPv6multicast VLAN port interface-listRequiredBy default, an IPv6 multicastVLAN has no ports.
