Configure Guest Access Services 71Step Summary The following list summarizes the fields selected or configuration itemsentered configure Guest access.1 Create a service profile. From the Service Profile wizard, enter “GuestsSrvcProf” as the Nameof the service profile and “Guests” as the SSID. Select SSID Type Clear. Select Beacon. Select the Fall ThroughAuthentication as “Web Portal”.2 Create a radio profile. From the Radio Profile wizard, enter the name of the radio profile. Select Service Profile Selection. Select the Guests service profile.Click Add. Click Finish.“Set Up VLANson WXSwitches” onpage 66Expand the WX switch icon in theOrganizer panel, right-click VLANs >Insert > VLANSetup guest VLAN on an WX switch that can access theexternal DMZ subnet.1 From VLAN Setup tab: VLAN ID: select number (must be unique) VLAN Name: enter name (must be unique) IP Address: enter IP Address2 From VLAN Member Selection tab: Available Members: select port(s) that connect to theDMZ; click Add3 From Spanning Tree tab: Select STP options4 From Spanning Tree Port Setup tab: Select STP port options Click Finish“Optional:ConfigureMobility Profiles”on page 73Expand the WX switch icon in theOrganizer panel, right-click on a WXswitch; select Edit. Click AAA >Mobility Profile.1 Click New Mobility Profile: Enter a Profile Name Enter: selected Select the Ports or Distributed MAPs Click FinishTable 11 Creating a Service for Guest AccessTask Path Primary Parameters to Configure
