Menu
2gig Technologies 2GIG-NVR1 Installation Instructions Manual
            | |
Network Video Recorder | Installation ManualCopyright © 2015 Nortek Security & Control 5Live VideoFigure 19. Live Video Screen1. Live Video2. Playback3. Alarm Search4. Quick Setup5. System Messages6. Hard Drive ConfiguraƟon7. Archive Menu8. Setup (NVR, IP Cameras)9. Lock NVR Access/Timeout OpƟon/Logout/Shutdown10. Layouts11. Live View12. Cameras List13. Alarm Info14. Layout (show/hide)15. Camera (show/hide)16. Alarm (show/hide)17. Full Screen, Auto Full ScreenSelect the “Quick Setup” tab to start configuraƟon on the 2GIG NVR.In the NVR Setup secƟon, set up the NVR’s Date and Time, Accounts for IPCameras, Network and Storage.In the IP Camera Setup, connect IP Cameras to the NVR using AutomaƟc Discoveryof IP Cameras, or IP Camera range.Figure 20. Quick SetupFigure 21. Date & Time1. Default device name is 2GIG NVR.2. Click the buƩon to the far right of the DEVICE TIME to open date and Ɵmewindow.3. In the DATE AND TIME window, select TIME ZONE using down arrow to thefar right.4. Set Daylight Savings Time by entering Start and End Ɵmes for DST in yourregion.5. Set Device Date and Time by ediƟng the pop-up menu.6. Set Date Format as desired.7. Click the GREEN CHECK MARK to Save changes.8. Use Network Time Protocol to keep your NVR date and Ɵme accurate.9. Click the GREEN CHECK MARK to Save changes.10. Close Date & Time window.11. Make sure “Sync Camera Time” is set to AUTO. The NVR Date and Time willbe synchronized to all IP Cameras.Figure 22 AuthenƟcaƟon AccountsThe AuthenƟcaƟon Accounts is used when discovering IP Cameras. If the UserName and password needs to be changed, use the mouse, leŌ-click on the Adminline. Doing this will display a Modify account screen where User Name andPassword can be changed.161 2 3 4 5 6 7 8 910121314 171511 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved