Fujitsu CELSIUS C620 manuals
CELSIUS C620
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Your CELSIUS C620
- Notational conventions
- Ports and controls
- Rear view
- Important notes
- Cleaning the device
- FCC Compliance Statement
- Function overview
- iRMC S3 with integrated management LAN port
- Preparation for initial startup
- Installation steps
- Rack - mounting and dismounting
- Fujitsu rack systems
- Installing the device in the rack
- Slide the device into the rack
- Pulling out or removing the device from the rack
- Take the device out of the telescopic rails
- Connecting external devices
- Ports on the device
- Connecting external devices to the USB ports
- Connecting the device to the mains voltage
- Switching the device on
- Shutting down the device
- Performing system configuration
- Systems without a pre-installed operating system
- Operation
- Indicators on the device
- LAN indicators
- Optical drive
- Settings in BIOS Setup
- Property and data protection
- BIOS setup security functions
- Troubleshooting and tips
- Troubleshooting
- Monitor stays blank
- No mouse pointer displayed on the monitor
- Tips
- System expansion
- Opening the device
- Closing the device
- Overview of the bays and drives in your device
- Removing and installing an accessible 5¼ inch drive (optical drive, ODD)
- Installing an accessible 5¼ inch drive
- Changing the drive cage
- Removing and installing non-accessible drives (hard disks, HDD/SSD)
- Removing and installing non-accessible 3½ inch drives (hard disks, HDD)
- Installing and removing fan modules
- Removing a defective fan module
- Installing a new fan module
- Expansion cards
- Occupancy of the PCI slots
- Installation of an expansion card into riser module 1 (low profile)
- Installation of an expansion card into the graphics card carrier
- Install backup unit (BBU/FBU) (only in conjunction with a RAID controller)
- Connecting the BBU cable to the battery backup unit
- Installing the battery backup unit into the BBU carrier
- Installing the FBU into the BBU carrier
- Installing the backup unit with the BBU carrier
- Connecting the BBU/FBU cable to the RAID controller
- Routing the BBU/FBU cable
- Final steps
- Installing the heat sink
- Mainboard expansions
- Changing the front panel module
- Installing a new front panel module
- Replacing the lithium battery
- Technical data
- Index