Menu
Mitsubishi Electric 800 Series manuals
800 Series
Table of contents
- instruction manual
- safety instructions
- FR-A8NC
- Table Of Contents
- Table Of Contents
- Table Of Contents
- PRE-OPERATION INSTRUCTIONS
- Component names
- Inverter option specifications
- CC-Link version
- INSTALLATION
- Installation procedure
- Setting of the terminating resistor selection switch
- WIRING
- Connection to the connector
- Unit replacement while online
- System configuration example
- Connection of several inverters
- INVERTER SETTING
- Operation mode setting
- Operation at communication error occurrence
- Fault and measures
- Inverter reset
- CC-Link function setting
- Baud rate setting (Pr.543)
- Frequency command with sign (Pr.541)
- FUNCTION OVERVIEW
- Output from the inverter to the network
- Input to the inverter from the network
- I/O SIGNAL LIST
- I/O signal when CC-Link Ver.1 one station (FR-A5NC compatible) is occupied (Pr.544 = 0)
- I/O signal when CC-Link Ver.1 one station is occupied (Pr.544 = 1)
- I/O signal when CC-Link Ver.2 double setting is selected (Pr.544 = 12)
- I/O signal when CC-Link Ver.2 quadruple setting is selected (Pr.544 = 14)
- I/O signal when CC-Link Ver.2 octuple setting is selected (Pr.544 = 18)
- DETAILS OF INPUT AND OUTPUT SIGNALS
- Input signals (inverter (FR-A8NC) to master module)
- Details of remote register
- Remote register (inverter (FR-A8NC) to master module)
- Instruction codes
- Monitor codes
- Torque command by CC-Link communication
- PROGRAMMING EXAMPLES
- Program example for reading the inverter status
- Program example for setting the operation mode
- Program example for setting the operation commands
- Program example for monitoring the output frequency
- Program example for parameter reading
- Program example for parameter writing
- Program example for setting the running frequency
- Program example for fault record reading
- Program example for resetting the inverter at inverter error
- Instructions
- troubleshooting
- HOW TO CHECK FOR ERROR USING THE LEDS
- When two or more inverters are connected
- Communication stops during operation
800 Series
Table of contents
800 Series
Table of contents
- instruction manual
- safety instructions
- Table Of Contents
- PRE-OPERATION INSTRUCTIONS
- Component names
- Specifications
- INSTALLATION AND WIRING
- Wiring
- RELAY OUTPUT
- Terminals
- Parameter setting
- Connection diagram when using electronic bypass sequence function
- APPENDIX
- Appendix2 Instructions for EAC
- Appendix3 Restricted Use of Hazardous Substances in Electronic and Electrical Products
- Appendix4 Referenced Standard (Requirement of Chinese standardized law)
800 Series
Table of contents
- safety instructions
- Table Of Contents
- Table Of Contents
- CONTENTS
- INTRODUCTION
- Product checking and accessories
- Inverter component names
- About the related manuals
- INSTALLATION AND WIRING
- Peripheral devices
- Removal and reinstallation of the front cover
- Installation of the inverter and enclosure design
- Cooling system types for inverter enclosure
- Inverter installation
- Protruding the heatsink through a panel
- installation of the inverter
- Terminal connection diagrams
- Main circuit terminals
- Terminal layout of the main circuit terminals, wiring of power supply and the motor
- Applicable cables and wiring length
- Earthing (grounding) precautions
- Control circuit
- Details on the control circuit terminals of the converter unit (FR-CC2-C)
- Control logic (sink/source) change
- Wiring of inverter control circuit
- Wiring precautions
- When using separate power supplies for the control circuit and the main circuit
- When supplying 24 V external power to the control circuit
- Communication connectors and terminals
- Ethernet connector
- USB connector
- Installing a communication option
- PRECAUTIONS FOR USE OF THE INVERTER
- Electro-magnetic interference (EMI) and leakage currents
- Countermeasures against inverter-generated EMI
- Power supply harmonics
- Power-OFF and magnetic contactor (MC)
- Countermeasures against deterioration of the 600 V class motor insulation
- Checklist before starting operation
- Failsafe system which uses the inverter
- PROTECTIVE FUNCTIONS
- Inverter fault and alarm indications
- List of fault displays
- PRECAUTIONS FOR MAINTENANCE AND INSPECTION
- Inspection item
- Daily and periodic inspection
- Checking the inverter and converter modules
- Cleaning
- Inverter replacement
- Measurement of main circuit voltages, currents and powers
- Measurement of powers
- Measurement of currents
- Measurement of inverter output frequency
- SPECIFICATIONS
- Inverter rating
- Common specifications
- Outline dimension drawings
- APPENDIX
- instructions for ul and cul
800 Series
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Safety instructions
- fire prevention
- Chapter 1 INTRODUCTION
- Product checking and accessories
- serial number
- Inverter component names
- About the related manuals
- Peripheral devices
- Removal and reinstallation of the operation panel or the front covers
- Installation of the inverter and enclosure design
- Amount of heat generated by the inverter
- Cooling system types for inverter enclosure
- Inverter installation
- Protruding the heat sink through a panel
- Terminal connection diagrams
- main circuit
- Main circuit terminals
- Main circuit terminal layout and wiring to power supply and motor
- Applicable cables and wiring length
- Earthing (grounding) precautions
- Control circuit
- Details on the control circuit terminals of the converter unit (FR-CC2)
- Control logic (sink/source) change
- Wiring of inverter control circuit
- Wiring precautions
- When using separate power supplies for the control circuit and the main circuit
- When supplying 24 V external power to the control circuit
- Safety stop function
- Communication connectors and terminals
- USB connector
- RS-485 terminal block
- Connection to a motor with encoder (Vector control)
- wiring example
- Parameter settings for a motor with encoder
- Connection of stand-alone option units
- Connection of the high power factor converter (FR-HC2)
- Connection of the power regeneration converter (MT-RC)
- Chapter 3 PRECAUTIONS FOR USE OF THE INVERTER
- Techniques and measures for electromagnetic compatibility (EMC)
- Converter unit (FR-CC2) built-in EMC filter
- Power supply harmonics
- Installation of a reactor
- Power shutdown and magnetic contactor (MC)
- Countermeasures against deterioration of the 400 V class motor insulation
- Checklist before starting operation
- Failsafe system which uses the inverter
- Chapter 4 PROTECTIVE FUNCTIONS
- Reset method for the protective functions
- Check and clear of the fault history
- operating procedure
- List of fault displays
- INSPECTION
- Daily and periodic inspection
- Checking the inverter and converter semiconductor devices
- Cleaning
- Removal and reinstallation of the control circuit terminal block
- Measurement of main circuit voltages, currents, and powers
- Measurement of powers
- Measurement of currents
- Pressure test
- Inverter rating
- Common specifications
- Outline dimension drawings
- For customers replacing the conventional model with this inverter
- Replacement of the FR-A500(L) series
- Comparison with FR-A840
- Instructions for compliance with the EU Directives
- Instructions for UL and cUL
- Instructions for EAC
- Restricted Use of Hazardous Substances in Electronic and Electrical Products
- emc directive
800 Series
Table of contents
- fire prevention
- inverter model
- Table Of Contents
- FR-F820-00077(1.5K)
- wiring precautions
- function description
- precautions for use of the inverter
- FR-F820-00250(5.5K)
- troubleshooting
- FR-F820-00340(7.5K)
- instructions for ul and cul
- motor overload protection
- FR-F820-00770(18.5K)
- FR-F820-02330(55K)
- FR-F840-00126(5.5K)
- FR-F840-00380(18.5K)
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved