Mitsubishi Electric 800 Series Quick Start Manual

Also see for 800 Series: Instruction manual INSTALLATION GUIDELINE Instruction manual Instruction manual Hardware instruction manual

INVERTERFR-E846 dedicated protective cover

Specifications subject to change without noticeIB(NA)-0600987-A(2307)MEE1.2.Thank you for choosing this Mitsubishi Electric inverter option unit.This document provides handling information and precautions for use of this product. Incorrect handling mightcause an unexpected fault. Before using this product, always read this document carefully to use this productcorrectly.Please forward this document to the end user.This product is a protective cover to be installed to a main circuit connector of the FR-E846 inverter (IP67model) to prevent insertion/removal of the connector during power-on.3 Installation procedureThe following explains an example of installation to the main circuit connector for motor.This product can also be installed to the main circuit connector for power supply and the main circuitconnector for option.When installing this product to all of the three connectors, prepare three sets.1. Connect a cable to a connector, then lock them.2. Fit the holes on the FR-E846 dedicated protective cover to the mounting holes, thentighten the mounting screws. (Tightening torque: 1.65 N·m)1 Enclosed items 2 Outline dimensionsCheck the enclosed items and quantity of eachitem.CAUTION• Do not apply strong force to the product. Doing so may damage the product.Enclosed items QuantityFR-E846 dedicated protectivecover (FR-E8PC) 1Mounting screw (M4-8) 2Manual 1(Unit: mm)Main circuitconnector for optionMain circuit connectorfor motorMain circuit connectorfor power supplMounting holesfor protective coverMounting holes forprotective coverMounting holes forprotective cover

/ 2

Related manuals for Mitsubishi Electric 800 Series