ABB 07DO93-I manuals

07DO93-I

Brand: ABB | Category: Controller

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. Advant Controller AC 31 / Issued:
5. Introduction
6. General setup rules
7. Basic units with remote extensions option
8. Operation of the 40 and 50 series basic units
9. Program execution
10. Bus transmission
11. Refresh times / response times
12. References
13. Technical specifications
14. Technical specifications of the CS31 system bus
15. Basic units
17. Centrally extensible remote units
18. Technical specifications of the centrally extensible remote units
19. Digital central extensions
20. Digital central extensions specifications
21. Analog central extension
22. Technical specifications of the analog central extension
23. Analog inputs diagrams
24. Analog outputs diagrams
25. Hardware configuration, switches on left side of analog extension
26. Configuration via push button on front panel of analog extension
27. Labels
28. Installation
29. Dimensions (in mm)
30. Earthing
31. The CS31 system bus
32. Basic unit and remote unit cabling
33. Cabling digital central extensions
34. Cabling the analog central extension
35. Addressing
36. Addressing slave basic units or remote extension units on the CS31 systembus
37. Summary
38. Programming
39. List of variables
40. Initialization of the basic units
41. Configuration
42. Configuration with the CS31CO function block
43. Communication
45. Protocol description
46. Configuration of the MODBUS interface
47. Point to point communication with the integrated ASCII interface
48. Point to point communication with the programming protocol
49. Diagnosis
50. Detection of errors
51. Read the PLC status via the programming software
52. Meaning of the contents of the error word flags
53. A1 Correspondence between variables and physical addresses
54. A2 Historical values