Menu
xxter enOcean ANE01 Manual
             |
1xxter enOcean manual xxter b.v.Elandsgracht 73 I1016 TR AmsterdamThe NetherlandsTel. +31 20 6242 865www.xxter.cominfo@xxter.comThis manual is a general instruction for connecting the antenna and configuring xxter withenOcean. If required enOcean can also be combined with a KNX installation.To make use of enOcean, please note the following prerequisites:1) An xxter module type HC01C or newer2) An xxter enOcean ANE01 antenna3) The latest configuration tool (version 1.8.3 or newer)4) The latest firmware (version 1.8.3 or newer)Connecting the antennaThe enOcean ANE01 antenna has a serial connector and a power split cable, which bothneed to be connected. Please follow the following instructions:1) Make sure the xxter is disconnected from the power.2) Attach the serial connector of the ANE01 to the serial (RS232) port of your xxter.3) Attach the power split cable to the xxter unit.4) Attach the power adapter of the xxter unit to the split cable.Now the power adaptor can be reconnected to the power socket and the xxter unit as well asthe enOcean antenna will have power. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved