Menu
xtpower MP-10000 Technical Description, User's Manual
   |
Istruzioni pacco batterie_EN;Jan14DESCRIPTION USE OF BATTERY PACK MP-10000 ENInstructions for recharging1. Remove all components from packaging and check any visible damage of the device.2. Connect battery pack to mains power supply (AC 100-240V 50/60hz) as shown below.3. Connect power supply to battery pack in connector INPUT4. Connect power supply to main socket.5. Recharging time is 5 hours approximately.1 Battery pack2 Power supply for battery pack rechargingINSTRUCTIONS FOR BALANCE CONNECTION1 Power supply of balance.2 Cable connection balance battery pack3 Selector output voltage of battery pack. (Select 9V)1. Place the selector (3) at 9V indication on the upper side of battery pack.2. Connect provided connection cable (2) in connector OUTPUT of battery pack.3. Connect the other end of the cable (2) to balance power outlet.4. Press power button on battery pack (4).5. Duration of charging is 40 hours appromately.121234 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved