Menu
waatr PureMax 4D User Manual
  |
ManualCustomer Service: hello@waatr.com • 1-833-642-7659User ManualChargingTo charge, place the magnetic chargeron top of the cap over the charging pinsand connect the USB plug to a walladapter. Full charge takes about 3-4hours.Breathing ORANGElight while chargingSolid GREENlight when fully chargedGREENlight indicates40% - 100%chargeORANGElight indicates11% - 39%chargeREDlight indicates1% - 10%chargeBattery LifePress the activation buttononce to check the battery life.Self-Cleaning FeatureTo conserve battery, PureMax ships with the self-cleaning feature deactivated. To activate the self-cleaningfeature, LONG PRESS the activation button for 3 seconds; the indicator light will blink GREEN upon successfulactivation. To deactivate this feature, LONG PRESS the activation button for3 seconds; the indicator light will blink RED upon successful deactivation. Once self-cleaning mode is turnedON, PureMax will automatically activate once every hour for 15 seconds to keep the bottle odor-free. Whileself-cleaning is in-progress, indicator light will breathe BLUE.UV-C Smart Safety SensorTo protect users from accidental eye exposure, PureMax is built with asmart safety sensor. This sensor deactivates the UV-C LED once the capis removed from the bottle. If the user removes the cap from the bottle duringPure or Ultra-Pure Mode or self-cleaning mode is in progress, the indicator LEDwill blink RED for 3 seconds and then the UV-C LED will turn off. This preventsuser from accidental exposure to the UV-C light.Pure Mode PurificationPress activation button twice to activatePure Mode. This mode will activate UV-CLED for 1 min. to purify water. During thisprocess, the indicator light will breatheBLUE. Once the purification is completed,the indicator light will flash GREEN.Press activation button thrice to activateUltra-Pure Mode. This mode will activate UV-CLED for 3 min. to maximize purification,destroying 99.999999% of germs. During thisprocess, the indicator light will breathe BLUE.Once the purification is completed, the indicatorlight will flash GREEN.Press 2X forPure ModeUltra-Pure Mode PurificationPress 3X forUltra-Pure ModeDrink Water ReminderTo conserve battery, PureMax ships from withthe drink reminder feature deactivated. Toactivate the drink reminder feature, press theactivation button 5 times; the indicator lightwill blink ORANGE upon successful activation.To deactivate this feature, press the activationbutton 5 times; the indicator light will blinkRED upon successful deactivation. Once thedrink reminder is turned ON, PureMax will slowblink GREEN 3 times every 30 minutes for upto 2 hours. If the user does not remove the capfor more than 2 hours, the drink reminder willgo into standby mode until the user removesthe cap.Flashing RED:Hydration Reminders:OFFFlashing ORANGE:Hydration Reminders:ONFlashing GREEN:Hydration Reminders:IN PROGRESSFlashing REDSmart Safety SensorACTIVATEDScan forinstructionalvideosGREENSelf-cleaningONREDSelf-cleaningOFFBLUESelf-cleaningIN PROGRESS |
Related manuals for waatr PureMax 4D
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved