usha FH 3212-C Instruction Manual

Contents

cleaning and maintenance

usha FH 3212-C Instruction Manual Manual pdf 6 page image

6Attention:Functions of the remote control buttons fully correspond to those of the controlpanel buttons. Automatic release button The fan heater is equipped with autorelease button when overheated.• If the unit starts overheating, automatic thermal switch will be on, the fanheater will switch off.• In this case immediately take the plug out of the socket.• Make sure that the rear and the front grids are unrestricted and nothingprevents air flow.• Let the fan heater to cool off for about 15-20 minutes before switching it onagain.• Plug the appliance, switch it on and set power and room temperature again.• If the unit does not switch on it may mean that there are damages. In thiscase please contact your nearest authorized Usha service centre.clEANINg ANd MAINTENANcE• Unplug and take the plug out of the socket before cleaning.• Wipe the unit case with a dry cloth.• Do not use solvents or abrasive substances for cleaning.• Do not immerse the fan heater in water or any other liquid. Take care liquiddoes not get into the fan heater case in order not to damage it or avoidelectric shock.• After cleaning put the fan heater in the box and keep in a dry place.• Provide the cord does not touch sharp objects.• Before using the fan heater for the next time check its functionality andisolation of the cord.TEcHNIcAl spEcIFIcATIoNsVoltage: 220-240V AC, 50HzWattage: Low: 1000W/ High: 1800W

/ 8

Related manuals for usha FH 3212-C