red lion RAM-6021 Software User's Manual

Also see for RAM-6021: Quick start guide Hardware and installation guide Quick start guide Hardware guide

red lion RAM-6021 Software User's Manual Manual pdf 53 page image

RAM-6021 Wired Router 53Network Tab• Click on the Add button and the following window will appear:Tunnel Name: Select the name of the GRE name by choosing one of the options available in the provided drop‐downlist.Enabled: Select Yes to enable the tunnel.Local bind‐to IP: Set the local bind IP address for tunneled packets. This field is optional. Note: If supplied, the Local IPAddress must be an address on another interface of this host. If not supplied, tunneled packets can be received fromany interface.Local Endpoint IP/Mask (Required): Set the local GRE IP Endpoint IP/mask.Remote Public IP (Required): Set the Remote Public IP for this GRE connection.Remote Endpoint IP/Mask (Required): Set the Remote GRE IP Endpoint IP/mask.Inbound Key: Specify a key for use with keyed GRE. Key is either a number or an IP address. The Inbound Key is usedfor input only. This is an optional field.Outbound Key: Specify a key for use with keyed GRE. Key is either a number or an IP address. The Outbound Key isused for output only. This is an optional field.Time‐to‐Live (Required): Set a fixed Time‐to‐Live for tunneled packets. The recommended setting for this field is 64.Values over 64 may cause connection failures.Use Multicast: Select Yes to enable Multicast for the tunnel.Use ARP: Select Yes to enable ARP for the tunnel.Start Tunnel at Boot: Select Yes to allow the interface to become active at system start.• Click on the Finish button. You will be returned to the GRE Tunnels dialog window and the Configuration Table willnow be populated with the recently entered data.