red lion RAM-6021 Software User's Manual

Also see for RAM-6021: Quick start guide Hardware and installation guide Quick start guide Hardware guide

red lion RAM-6021 Software User's Manual Manual pdf 51 page image

RAM-6021 Wired Router 51Network TabInterface: Select the interface on which this port will be opened. Incoming connections to this interface will beallowed into the device. Note: For connections destined to a device beyond this unit, use Host Redirect, NAT or DMZrules instead.Select Protocol: Choose the protocol for the type of data you want to allow.Source Network via Whitelist: Select a whitelist name from the list of names available in the drop‐down list.Whitelists may be viewed/defined in the via the Network/Firewall/ACL Rules screen.• Click on the Finish button. You will be returned to the Firewall Port Forwarding dialog window and the ServiceAccess (Allow) Rules table will now be populated with the recently entered data.• To delete an existing rule, select it in the table and click on the Delete button. To edit an existing rule, select it inthe table and click on the Edit button.• Click on the “Save” button for changes to be saved without activating the interface until you reboot the unit, the“Apply” button will save your settings and apply them immediately. To revert to the previous defaults, click on the“Revert” button.Host Redirect (Port Forwarding) Rules: The Host Redirect Rules option is used to configure port forwarding rules thatpermit ports on external, untrusted interfaces to be passed to ports on internal hosts on the same or different ports.• Click on the Add button on the following dialog window will appear:Original Destination Port (Required): Enter the port that an external device will try to connect to. This is the port thatwill be open on the specified interface.Select Interface: Select the interface on which to open the specified port. Incoming connections will be allowed.New Destination IP Address (Required): Enter the IP Address that the incoming connection will be redirected to. Thiscan be an IP Address within or beyond this device.New Destination Port (Required): Enter the port that the incoming connection will be redirected to. This may be thesame number as the Original Destination Port.