red lion RAM-6021 Software User's Manual

Also see for RAM-6021: Quick start guide Hardware and installation guide Quick start guide Hardware guide

red lion RAM-6021 Software User's Manual Manual pdf 27 page image

RAM-6021 Wired Router 27Admin Tab• Click on the Firmware Update menu item and the following window will appear:To upgrade the firmware of the Red Lion router:Boot Image File: Select the file that will perform the Kernel update.Root Image File: Select the file that will perform the system update.Preserve current configuration: Select YES to cause the device to save its current configuration and restore it after thefirmware image is installed.Note: Select the “Boot File System” type and “Browse” to open “boot” file image first and click on the “Upload” button foruploading the boot file. Then once this step is completed, select “Root File System” type and “Browse” to open “root” fileimage and click on “Upload” button for uploading the root file.• Click on the “Install” button.Note: This procedure could take anywhere from 6‐10 minutes to complete.WARNING: It is important that the power to the unit is not interrupted as this could cause the unit to become corrupt andrequire shipment back to the factory to correct.2.3.3.1 Configuration ManagerThe Configuration Manager menu item saves a copy of the current system configuration, i.e., Export. This is useful when aconfirmed good configuration is operational. A backup can be exported for use should the configuration become corruptor re‐configured in error.