red lion PAX Series Manual

Also see for PAXCDL: User manual

red lion PAX Series Manual Manual pdf 1 page image

MPAX PERSONALITY MODULE SELECTOR GUIDE FOR LPAXOur large displays have various input options, determined by the installation of a MPAX personality module. These MPAXmodules are based on standard PAX panel meters, and use the same data sheet as the PAX meter for specifications and wiring.About the MPAX Input ModulesThe MPAX Module serves as the input to the LPAX Display. There are several different modules to cover a variety of inputs. TheMPAX module provides input scaling which allows the LPAX to display most any engineering unit. Once the MPAX is inserted intothe LPAX, the unit has the same functions and capabilities of our PAX Series Intelligent Panel Meters. A full set of PAXprogramming instructions will be included with the MPAX Module.Note: The MPAX provides the operating power for the LPAX, therefore you must select either the AC or DC MPAX corre spondingwith your application and available power.Selecting Your Display ComponentsTo build a complete display unit, you will need an LPAX and an MPAX Input Module. The LPAX is only a display and will notoperate without an MPAX Module. Please use the following chart to identify the appropriate MPAX Module (including supplypower) and LPAX Display that will satisfy your application.MPAX Modules for LPAX5 (Analog units)MPAX Modules for LPAX6 (Digital units)MPAX MODULES *SIGNAL TYPE INPUT RANGES85-250 VAC 11 to 36 VDC/ 24 VACLPAX DISPLAYSUniversal DC InputsDC Voltage 200 mV, 2 V, 20 V, 300 VDC Current 200 μA, 2 mA, 20 mA, 200 mA, 2 AmpResi stance 100 ohm, 1000 ohm, 10 K ohmMPAXD000 MPAXD010 LPAX0500Process Inputs 0-20 mA or 0-10 V DC MPAXP000 MPAXP010 LPAX0500Temperature Inputs MPAXT000 MPAXT010 LPAX0500Strain Gage/Load Cell 24 mV or 240 mV MPAXS000 MPAXS010 LPAX0500True RMS ACVoltage/CurrentAC Voltage 200 mV, 2 V, 20 V, 300 VAC Current 200 uA, 2 mA, 20 mA, 200 mA, 5 Amp MPAXH000 N/A LPAX0500SETPOINTYESMPAX MODULES*YESYESSIGNAL TYPEYES85-250 VAC 11 to 36 VDC / 24 VACLPAXDISPLAYSCount/Rate/Serial SlaveCOMMSMPAXI000† MPAXI010† LPAX0600CountYESMPAXC000 MPAXC010 LPAX0600Rate-MPAXR000 MPAXR010 LPAX0600Clock/Timer-MPAXCK0 0†† MPAXCK1 0†† LPAXCK0 0** YESANALOGYES---REAL-TIMECLOCK---YESOPTIONAL PLUG-IN CARD COMPATIBILITYYESTimer MPAXTM00†† MPAXTM10†† LPAXCK0 0** YES - -MPAX Modules for LPAXDA (Dual Analog Unit)MPAX MODULES *SIGNAL TYPE INPUT RANGES85-250 VAC 11 to 36 VDC/ 24 VACLPAX DISPLAYDual Process Inputs 0-20 mA or 0-10 VDC MPAXDP00 MPAXDP10 LPAXDA00Thermocouples -T, E, J, K, R, S, B, N, C,or Custom Scaling RTDs - 100 ohm Pt (platinum) 385/392,120 ohm Nickel 672, or 10 ohm Copper 427