Menu
red lion DRRJ11T6 Manual
  | |
1RJ-11 DIMENSIONS In inches (mm)RJ ADAPTERS & CABLESBulletin No. DRRJ-CDrawing No. LP0554Released 7/03Tel +1 (717) 767-6511Fax +1 (717) 764-0839www.redlion-controls.comDRRJ11T6 and DRRJ45T8 Connector to Terminal AdaptersMODEL DESCRIPTION PART NUMBERCBJCBLDRRJRJ-12 to RJ-12 10' CableRJ-45 to RJ-45 6" Jumper CableRJ-45 to RJ-45 10' CableRJ-45 Connector to Terminal AdapterRJ-12 to RJ-12 1' CableRJ-45 Parallel ConnectorRJ-11 to RJ-11 6" Jumper CableRJ-45 to RJ-45 1' CableRJ-11/12 Connector to Terminal AdapterCBLRLC02CBLRLC07CBLRLC04DRRJ45T8CBLRLC01DRRJ45P6CBJ11BD5CBLRLC03DRRJ11T6ORDERING INFORMATIONAPPLICATION EXAMPLESRS485 via RJ-11 connector and DRRJ11T6Product Examples: DLC, IAMS, ITMS, and PAX.A Red Lion Controls device with an RS485 RJ-11 port is connected to theDRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is thenwired to run the RS485 MODBUS serial information to another device.A Red Lion Controls device with an RS232 RJ-12 port is connected to theDRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminalblock is then wired to run the RS232 serial information to another device.RS232 via RJ-12 connector and DRRJ11T6Product Examples: G3, Modular Controller, and Paradigm (CL,CX, GL, TX, and VX)DESCRIPTIONThese adapters convert modular RJ-style connectors to terminalblock connectors, providing a rugged means by which standardshielded cabling can be used in lieu of flat, unshielded cable. TheDRRJ11T6 can be used with RJ-11 or RJ-12 cables, while theDRRJ45T8 can be used with RJ-45 connectors. The adapters aredesigned to mount on any standard DIN rail.Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for thescrew-terminals correspond directly to the terminal pin out of the RJconnector. There is an extra terminal on each block labeled “S” for theconnection of shields. |
Related manuals for red lion CBJ11BD5
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved