red lion CUB4i User Manual

Contents

safety summary

red lion CUB4i User Manual Manual pdf 1 page image

1 LCD, POSITIVE REFLECTIVE OR NEGATIVE TRANSMISSIVEWITH YELLOW/GREEN OR RED BACKLIGHTING FOUR SELECTABLE D.C. RANGES0 to 199.9 mV, 1.999 V, 19.99 V, 199.9 V (CUB4V)0 to 199.9 μA, 1.999 mA, 19.99 mA, 199.9 mA (CUB4I) 0.6 INCH (15.2 mm) HIGH LCD DIGITS BUILT-IN SCALING PROVIDED AUTO ZEROING CIRCUIT SELECTABLE DECIMAL POINTS WIRE CONNECTIONS MADE VIA SCREW CLAMP TYPETERMINALS FITS DIN STANDARD CUT-OUT 2.68" (68 mm) x 1.30" (33 mm) NEMA 4X/IP65 SEALED FRONT PANEL BEZEL 9 TO 28 VDC POWEREDDESCRIPTIONThe CUB4 Volt and Current Meters are designed and manufactured using thelatest technology for a high quality, compact, affordable instrument for use inindustrial environments. Each unit has a 3½-digit LCD display with 0.6 inch(15.2 mm) high digits and a DIP switch selectable decimal point. The displaysare available in positive image reflective (black digits, reflective background) ornegative image transmissive (illuminated digits, dark background) with red oryellow/green backlighting.The units are constructed of a lightweight, high impact plastic case with aclear viewing window. The sealed front panel meets NEMA 4X/IP65specifications for wash-down and/or dusty environments, when properlyinstalled. A CUB4V or CUB4I unit can be mounted in the same panel cutout asthe CUBVD and CUBID units.The optional Micro Line/Sensor Power Supply (MLPS1000) is designed toattach to the rear of an installed CUB4V or CUB4I to provide the necessary powerfor the unit. The optional supply can be powered from a 85-250 VAC source.ORDERING INFORMATIONMODEL NO. DESCRIPTION PART NUMBERSCUB4VDC Voltmeter CUB4V000DC Voltmeter W/Yel-Grn Backlighting CUB4V010DC Voltmeter W/Red Backlighting CUB4V020CUB4IDC Current Meter CUB4I000DC Current Meter W/Yel-Grn Backlighting CUB4I010DC Current Meter W/Red Backlighting CUB4I020MLPS Micro Line/Sensor Power Supply MLPS1000SAFETY SUMMARYAll safety related regulations, local codes and instructions that appear in themanual or on equipment must be observed to ensure personal safety and toprevent damage to either the instrument or equipment connected to it. Ifequipment is used in a manner not specified by the manufacturer, the protectionprovided by the equipment may be impaired.SPECIFICATIONS1. DISPLAY: 3½-digit (-1999 to 1999), 0.6" (15.2 mm) high digits. Minus (-)sign is displayed when voltage or current is negative.2. DECIMAL POINTS: DIP switch selectable decimal points allow the displayto be read in tenths, hundredths or thousandths.3. POWER REQUIREMENTS:Reflective Versions: 9 to 28 VDC at 4 mA max.Backlight Versions: 9 to 28 VDC @ 35 mA typ., 50 mA max. Above 26VDC, derate operating temperature to 50°C.4. INPUT RANGES:D.C. VOLTAGE D.C. CURRENT(DIP Switch Selectable) (JMPR. Selectable)±199.9 mVDC ±199.9 μADC±1.999 VDC ±1.999 mADC±19.99 VDC ±19.99 mADC±199.9 VDC ±199.9 mADCMODEL CUB4 I - MINIATURE D.C. CURRENT METER &MODEL CUB4V - MINIATURE D.C. VOLTMETER2.95 (74.9)1.54 (39.1)1.96 (49.8).15 (3.8)1.29 (32.8)PANEL CUT-OUT2.68 +.025-.000(68 )+.8-.0 1.30(33 )+.024-.000+.6-.0.13 (3.3)DIMENSIONS In inches (mm) Note: Recommended minimum clearance (behind the panel) for mounting clipinstallation is 2.15" (54.6) H x 3.00" (76.2) W.UL Recognized Component,File # E179259CAUTION: Read completeinstructions prior to installationand operation of the unit.CAUTION: Risk of electric shock.Bulletin No. CUB4V/I-KDrawing No. LP0256Released 03/13Tel +1 (717) 767-6511Fax +1 (717) 764-0839www.redlion.net

/ 4

Related manuals for red lion CUB4i