red lion CR1000 User Manual

Contents

limited warranty

red lion CR1000 User Manual Manual pdf 1 page image

Inside US: +1 (877) 432-9908 Bulletin No. CR1000-AOutside US: +1 (717) 767-6511 Drawing No. LP1019www.redlion.net Effective 2017-09-26-1-Model CR1000 ‐ Industrial Operator Interface With TFT Display• CONFIGURED USING CRIMSON® 3.1 SOFTWARE• TWO SERIAL COMMUNICATION PORTS,(1 RS-232 and 1 RS-232/422/485)• 10 BASE T/100 BASE-TX ETHERNET PORT COMMUNICATESWITH UP TO FOUR PROTOCOLS SIMULTANEOUSLY• UNIT’S CONFIGURATION IS STORED IN NON-VOLATILE FLASHMEMORY• SD CARD SOCKET FOR LOADING DATABASE IN FIELD• INDUSTRIAL TFT LCD COLOR DISPLAY• NEMA 4X/IP66 FRONT PANEL• THREE FRONT PANEL LED INDICATORS• POWER UNIT FROM 24 ±20% VDC• RESISTIVE ANALOG TOUCHSCREENGENERAL DESCRIPTIONThe CR1000 is the perfect solution for applications that require theoperator to monitor and control more than just a single device. With twoserial ports and an Ethernet port, these HMI displays can connect tomultiple serial and Ethernet devices simultaneously, including PLCs,motor drives, bar code scanners, etc.The CR1000 performs the functions of a multiple protocol converter,using two high-speed serial communications ports and a 10/100 Base-TX Ethernet port. The Ethernet port supports up to four protocolssimultaneously, allowing dissimilar Ethernet based products tocommunicate with one another. The SD card slot can be used to load theunit's configuration file, allowing configuration changes to be made andsaved to the card for later transfer.The CR1000 range of HMIs is programmed with Red Lion's freeCrimson 3.1 software. Crimson offers easy to use drag and dropcommunications configuration, while the embedded image library allowsthe programmer to create intuitive screens and prompts for the operator.CONTENTS OF PACKAGE- CR1000 Operator Interface- Hardware packet and plate for mounting unit into panel- Terminal block for connecting power- Panel gasketSAFETY SUMMARYAll safety related regulations, local codes and instructions that appearin the manual or on equipment must be observed to ensure personalsafety and to prevent damage to either the instrument or equipmentconnected to it. If equipment is used in a manner not specified by themanufacturer, the protection provided by the equipment may beimpaired.Do not use the unit to directly command motors, valves, or otheractuators not equipped with safeguards. To do so can be potentiallyharmful to persons or equipment in the event of a fault to the unit.WARNING - EXPLOSION HAZARD - DO NOT DEQUIPMENT UNLESS POWER HAS BEEN SWOR AREA IS KNOWN TO BE NON-HAZARDOUCAUTION: Risk of Danger.Read complete instructions prior to installationand operation of the unit.C US LISTEDULRIND. CONT. EQ.34ADORDERING INFORMATION1 Contact your Red Lion distributor or visit our website for selection of SD cards, adapters and cables.MODEL NO. DESCRIPTION PART NUMBERCR10004.3" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 04000 002107.0" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 07000 0021010.4" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 10000 00210SD SD Card 1 SDxxxxxxCBL Communications Cables and Adapter 1 CBLxxxxxFILMProtective Film for CR1000 04xxx xxxxx G3FILM4KProtective Film for CR1000 07xxx xxxxx G3FILM07Protective Film for CR1000 10xxx xxxxx G3FILM10CRA000 Adapter Plate from Kadet 7 to CRX000 07 CRA000 AD070 70000Replacement Battery CRA000 BT3V0 00000