+GF+ GF 3-2630-X Manual

+GF+ GF 3-2630-X Manual Manual pdf 1 page image

The GF Amperometric Chlorine Electrodes is designed for use in fresh,clean water treatment applications where a level of Chlorine is always detectable.Free Chlorine electrodes are available in measurement ranges of 0.02 to 2 ppm,0.05 to 5 ppm or 0.1 to 20 ppm.Chlorine Dioxide electrodes are available in measurement ranges of 0.02 to 2 ppm.Electrodes require the 2650 Amperometric Electronics to output a digital (S3L) signal tothe 9950-X Chlorine Controller.Features:• Utilizing smart-sensor technology, this electrode incorporates a uniqueembedded memory chip within the electrode to communicate a wide varietyof information to the 2650 Amperometric Electronics and 9950-X ChlorineController. Electrode type, factory calibration data, service time, chlorine range,high and low temperature and more are stored on the chip. This information isaccessible via the 9950-X Chlorine Controller.• GF's patented DryLoc® connector provides quick assembly and a secureconnection. Gold-plated contacts and an O-ring seal ensure a waterproof andreliable interconnect to the 2650 Amperometric Electronics.• Integrated temperature element for automatic temperature compensation.• Separate drive electronics (2650) allow easy electrode replacement withoutrunning new cable.* NOTE: The 9950-X Chlorine Controller is not compatible with the standard9950 controller.English*3-2630.090*3-2630.090 Rev 16 02/22GF 3-2630-X Amperometric Free Chlorine ElectrodeGF 3-2632-X Amperometric Chlorine Dioxide ElectrodeManualCAUTION!1. Follow instructions carefully to avoid personal injury or damage to electrode.2. Prior to installation or removal:a. Disconnect flow through system.b. Drain below sensor level.3. Confirm chemical compatibility before use.4. Do not exceed the maximum pressure or temperature specifications.5. Do not alter product construction.Description• English• Deutsch• Français• Español• Italiano• 中文WARNING: The GF Chlorine Analyzer (electrode) is designed to be used in aclean, chlorinated flowing stream at all times. DO NOT use in applications whereelectrode could be exposed to periods without chlorine.