Menu
patura MaxiBox P350 User Manual
Also see for MaxiBox P250: Mounting instructions
                                                | |
Contents
| 
Connect the green earth lead from the energiser’sfence earth terminal (green) to the earthing system.Connect the red lead from the energiser’s fence outputterminal (red) to the fence.Connect the red lead to the fence. Provide a goodconnection.Operation• Keep this manual in a handy location.• Carefully read all the safety considerations starting on page 44.• Carefully check your installation to ensure that it complies with all local safety regulations.Select the output setting using the selector switch (see next page). One of the three output per-formance indicator lights will flash with each pulse. The lights indicate the approximate voltageat the fence output terminals, except when the selector switch is set to “Full power with batterytest”.RecommendedIndicates a load on the energiser. Attention required to ensure reliable animal con-trol.Fence is heavily loaded and needs urgent attentionIf at any time all the indicator lights flash for more than 10 seconds, turn off the energiser forapproximately 10 seconds, then turn it on again. If the indicator lights continue to flash, returnthe energiser to the nearest authorised service agent.The energiser functions according to the position of the power output and pulse speed swit-ches. See the diagram of the energiser on page 35.- 37 -Joint clampEnergiserEarth system |
Related manuals for patura MaxiBox P250
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved