kingsley-bate TR-114 Assembly Instructions Manual

kingsley-bate TR-114 Assembly Instructions Manual Manual pdf 1 page image

ASSEMBLY INSTRUCTIONS FOR THE TR-114LEG ASSEMBLY TABLE TOP ASSEMBLY DOWELS LEG ASSEMBLY* NOTEA TENONB MORTISE HOLELEG SUPPORT BRACKETSSTEP-IUnpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.NOTE: During assembly of the furniture please match the tenons and mortise holes with thecorresponding letters or numbers stamped on the furniture.STEP-IIMaking sure to carefully match thenumbers / letters stamped on thecomponent parts, fit SHORTSTRETCHER tenons into therespective mortise holes of theBOTTOM LONG LEG STRETCHERS and dowel assembly as shown.STEP-III:Again, (very important) carefully matching the numbers / letters stamped on the components,fit the STRETCHER assembly into the LEG ASSEMBLY frames as shown above.

/ 2

Related manuals for kingsley-bate TR-114