Menu
kincrome K12310 Owner's Assemble And Operating Manual
Also see for K12310: Manual
       | |
Contents | 
IMPORTANT SAFETY INFORMATIONThe use of vehicle support stands has inherent dangers to avoid risk of personal injury or property damagemake sure you are fully aware of the operating instructions for this product, the recommendations in thevehicle owners manual for jacking of your vehicle and the safe usage instruction for the jack you will use; allprior to lifting the vehicle. Do not exceed maximum working load limit of these support stands. Thesestands are intended for automotive use only. Be aware that large or heavy vehicles may exceed the standsstated capacity check vehicle owners manual or contact the vehicle manufacturer. Do not use for any otherpurpose accept the supporting of a raised vehicle, never use to support any structure or building, do notsupport any human load.UNPACKING AND ASSEMBLINGUnpacking CartonPlace carton in a clear, open area such as garage floor. Remove support stand bases and upper columnsfrom carton.AssemblyPlace a base securely on the floor. Insert the upper column into thelower section of base. Lift the handle and slowly insert the column asfar as it will go. Be careful not to drop the column and be aware to nottrap fingers. Once the column is inserted locate the hole drilled in thebottom of the upright. Using a small punch and hammer insert the splitpin provided, the split pin will protrude either side of the upper column,the pin is to prevent the column being removed from the base. Repeatfor both standsRaise the column until the desired height is reached, make sure thehandle has returned to its natural position and the pawl has fullyengaged the teeth on the upper column – do not exceed the maximumheight raised of the vehicle support stand.Preparing Work AreaBefore using vehicle support stands and a jack to lift vehicle, it is important to prepare work area properly.Follow this procedure each time a jack and support stands are used to help prevent property damage and orserious injury.1.) Thoroughly inspect vehicle support stands for damage or wear before each use. Briefly test operation ofunloaded stands before using to support any load. If vehicle support stands are damaged or are |
Related manuals for kincrome K12310
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved