Menu
kENDALL TI-84 Plus Manual
   |
Discovering Algebra Calculator Notes for the Texas Instruments TI-84 Plus ©2014 Kendall Hunt Publishing 1Calculator Notes for the TI-84 PlusNote: Entering ListsThere are six pre-set lists in the calculator: lists L1 through L6. You can createother named lists if needed. You can enter 999 elements into a list if enoughmemory is available.Clearing DataIf a list already has data in it, move the cursor up so that the list name ishighlighted and press ‘ Í.Entering Data Directly into a ListFollow the steps below to enter data (such as 400, 455, 390, 450, 360, 320,480, 480) into a list.a. Press … À (Edit...).b. Enter each number into list L1. If you do not see list L1, see the sectionsResetting a List or Recalling a List that follow. After entering eachdata value, press Í.When you are finished entering the data, pressy 5. If you wish to add a data value in the middle of the list,move the cursor to the place of insertion, press y 6, and then enterthe number. To remove an entry from a list, highlight the entry andpress {.Naming a ListIf you name a list, then you can save it for later use. To name a list, highlight thename of any list, for example L1, L2, and so on, and press y 6. A new listwill appear to the left of the list you highlighted. Enter a name for the list, forexample, YEAR. (The flashing A tells you that you are in Alpha mode, so unlessyou want to enter a number as part of the name, you can just enter the listname.) Press Í and you will see that the list now has a name.(continued) |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved